IP Over WDM


  • Danial Moj Optical Communication Technology Company, as a science-based manufacturing Company and the only Iranian Company holding License to Approve CWDM, DWDM Systems samples issued by the Communications Regulatory Authority (both permits) offers different types of its products as described below:

     

    Active Facilities:

    IP Over VIDM

    It is a single U system containing Active and Passive Parts and includes pre-defined Lambdas.

    Passive Section:

    In the Passive part, the wavelength of the 1550 system accumulates with wavelength 1310 and is separated in the opposite side too. In this stage, the main cores are connected to the left and right links of the apparatus and the wavelength 1310 is connected through the relevant adaptor to SDH equipment in the place. The PatchCord connection tests prevent any possible communication inside the network. Implementing this part is achievable and implementable with least disconnection time in network in case of not being exposed to high fall in the main core. Due to using passive parts in this section, it provides more than 100 years MTBF and causes higher probability of communication sustainability than other telecommunication systems.

    Active Section:

    This part consists of two switches:

    • Second layer switch: This contains eight network ports 10/100/1000 and two SFP 1G optical ports
    • Third layer switch: This contains eight network ports 10/100/1000 and two SFP 1G/ 10 G optical ports

    Specification Switches:

    Layer 2 Features:

    • Link Aggregation Control Protocol (LACP)
    • Up to 4K VLANs simultaneously (out of 4K VLAN IDs)
    • GVRP (GARP VLAN Registration Protocol)
    • Port Isolation
    • STP/RSTP/MSTP
    • IGMP Snooping

    Management

    • Web-based GUI
    • Command Line Interface
    • SNMP v1/v2c/v3
    • RMON (1,2,3,9 group)

    Quality Of Service

    • 4 priority queues
    • Support IEEE 802.1P
    • DSCP QoS
    • Rate limit feature

    Security Strategies

    • IP-MAC-Port-VID Binding
    • Access Control List (L2~L4 ACL)
    • 1x and RADIUS Authentication
    • Support DoS defend
    • Port Security
    • SSL and SSH encryptions
  • HARDWARE FEATURES

    Standards and Protocols

    IEEE 802.3i,IEEE 802.3u,IEEE 802.3ab,IEEE802.3z,IEEE 802.3ad,
    IEEE 802.3x,IEEE 802.1d,IEEE 802.1s,IEEE 802.1w,IEEE 802.1q,
    IEEE 802.1x,IEEE 802.1p

    Interface

    8 10/100/1000Mbps RJ45 Ports
    (Auto Negotiation/Auto MDI/MDIX)
    2 1000Mbps SFP Slots
    1 Console Port

    Network Media

    10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
    100BASE-TX/1000Base-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
    1000BASE-X: MMF, SMF

    Fan Quantity

    Fan less

    Dimensions (W x D x H)

    11.6*7.9*1.7in. (294*200*44 mm)

    Power Consumption

    Maximum: 10.7W (220V/50Hz)

    Power Supply

    -48 V DC

     

    PERFORMANCE

    Bandwidth/Backplane

    20Gbps

    MAC Address Table

    8k

    Packet Buffer Memory

    4Mb

    Packet Forwarding Rate

    14.9Mpps

    Jumbo Frame

    10240 Bytes

     


    SOFTWARE FEATURES

    Quality of Service

    Support 802.1p CoS/DSCP priority
    Support 4 priority queues
    Queue scheduling: SP, WRR, SP+WRR
    Port/Flow- based Rate Limiting
    Voice VLAN

    L2 Features

    IGMP Snooping V1/V2/V3
    802.3ad LACP (Up to 8 aggregation groups, containing 8 ports per group)
    Spanning Tree STP/RSTP/MSTP
    Port isolation
    BPDU filtering/guard
    TC/Root protect
    Loop back detection
    802.3x Flow Control

    VLAN

    Supports up to 4K VLANs simultaneously (out of 4K VLAN IDs)
    Port/ MAC/Protocol-based VLAN
    GARP/GVRP
    Management VLAN configuration

    Access Control List

    L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID;
    Time Range Based

     

    Security

    IP-MAC-Port-VID Binding
    IEEE 802.1X Port/MAC Based authentication, Radius, Guest VLAN
    DoS Defense
    Dynamic ARP inspection (DAI)
    SSH v1/v2
    SSL v2/v3/TLSv1
    Port Security
    Broadcast/Multicast/Unknown-unicast Storm Control

    Management

    Web-based GUI and CLI management
    SNMP v1/v2c/v3,compatible with public MIBs and TP-LINK private MIBs
    RMON (1, 2, 3, 9 groups)
    DHCP/BOOTP Client, DHCP Snooping, DHCP Option 82
    CPU Monitoring
    Port Mirroring
    Time Setting: SNTP
    Integrated NDP/NTDP feature
    Firmware Upgrade: TFTP & Web
    System Diagnose: VCT
    SYSLOG & Public MIBS

      

    OTHERS

    Certification

    CE, FCC, RoHS

    Package Contents

    Switch; Power Cord; Quick Installation Guide; Resource CD; Rack mount Kit; Rubber Feet

    System Requirements

    Microsoft® Windows® 8, 7, Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux.

    Environment

    Operating Temperature: 0℃~60℃

    Storage Temperature: -40℃~80℃

    Operating Humidity: 10%~90% non-condensing
    Storage Humidity: 5%~90% non-condensing

     

Sales

Sales Department

021-59175555

Download Catalog

For downloading a full catalog of the DataSheets you can use the below button.