This is one of the telecommunication facilities in OTN level which provides the possibility of transporting the traffic in different capacities ranging 100Mb to 10Gb on the OUT frame. This system contains 8 input client ports for the recipient services (UNI) and two Uplink (NNI) ports. The NNI1 port serves as the Main Uplink and NN2is Protection Uplink. Due to the existence of two ports NNI supporting (the Protection Config function in SNCP brands in Ring networks and/or establishing double routes in the Chain Networks) the function of this system is in this manner; The UNI side consists of eight any-client multi-rate access ports, UNI1 and UNI2 support 100Mbps~11.1Gbps services, and the other six support 100Mbps~6.5Gbps services. The total usable bandwidth of the 8-channel is limited to 20Gbps. The NNI side has two OTU2 ports. As an OTN access device, DMAMUXP010G082 is used to aggregate STM-1/4/16/64 service, GE/10GE service, and arbitrary service rate between 125Mbps and 10.7 Gbps into OTU2 for OTN networking. The 8 UNI ports receive multi services in clients and as the Cross connect already defined in the system, (the system) contains the capability of supporting a combination of TDM and Base Packet services. In the frame, the OTU2 is transmitted to recipient via one of the NNI defined ports. In opposite side; too, the Muxponder 10G receives the OTU2 frame from its NNI port and connects the received traffics to each UNI port of the relevant service client as per the defined CrossConnectConfig; and, the client receives this service.
Specifications Of The Apparatus (front view) Include:
- Eight service inputs (UNI)
- Two service outputs (NNI)
- The network port (NM)
- The Console ports
- The BITS port for adjusting the apparatus clock by an outside system
- The RST switch (for the hardware reset of the apparatus).
Muxponder 10G with 322 x 482 x 45 (HxWxD) physical dimensions in mm scale
Features
- G.709 defined OTN encapsulation, mapping, and overhead;
- Pluggable optical modules;
- Alarm detection;
- SNMP, CLI command line;
- Intelligent fan with controllable temperature and manual/automatic adjustable fan speed.
Product Specifications
- Eight service inputs (UNI)
- Two service outputs (NNI)
- The network port (NM)
- The Console ports
- The BITS port for adjusting the apparatus clock by an outside system
- The RST switch (for the hardware reset of the apparatus).
Index
Performance Parameter
Monitoring
Interface
SNMP
Interface
Connector Type
RJ-45
Rate
10/100M
Interface Protocols
SNMP Protocol
Console Interface
Connector Type
RJ-45
Baud Rate
115200; Data bit: 8; Stop bit: 1; No parity check
Electrical Specifications
RS-232
Line side optical
OUT 1 interface
OUT Input
Rn parameters
Receiving sensitivity dBm
-21(PIN)
<-28(APD)
Receiver Reflection dB
<-27
Overload power dBm
0(PIN)
-9(APD)
Input signal wavelength area
1280~1565 nm
OUT Output Sn parameters
Optical Spectral Properties
Maximum -20dB Spectrum width-nm
1(SFP)
Minimum side mode suppression ratio-dB
35
Center frequency
Nominal center frequency-THz
192.1~196.0
Center frequency offset - GHz
≤ ±12.5(100 GHz)
Average transmit power
Max-dBm
6
Min-dBm
0
Minimum extinction Ratio
8.2 (SFP)
Dispersion accommodation value-ps/nm
3600 (DM SFP)
Eye Frame
Meets ITUT.G957 or ITUT.G959.1
OUT 2 interfaces
OUT input Rn parameters
Rate - Gbit/s
9.953 ~11.318
Receiving sensitivity dBm
-14(PIN)
<-21(APD)
Receiver Reflection
<-27
Overload power dBm
>0(PIN)
>-9(APD)
Input signal wavelength area-nm
1280~1565
OUT output sn parameters
Optical spectral properties
Maximum -20dB spectrum width-nm
<0.3(NRZ)
Minimum side mode. /Suppression ratio-dB
>30
Central frequency
Nominal center frequency-THz
Meets ITU-T G.694.1
Center frequency offset
≤ ±12.5(100 GHz)
Average Transmit power dBm
-3 ~ 1
Minimum extinction Ratio dB
8.2
Dispersion acc0mmodation value-ps/nm
-300 ~ 800
Eye Frame
Meets ITUT.G957 or ITUT.G959.1
Client-side optical interface
Stm-1 interface
Rate
155 Mbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
Connector
Standard
LC dual Fiber Bi-directional (SFP)
Optional/s
LC single Fiber Bi-directional (SFP)
Stm-4 interface
Rate
622 Mbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
Connector
Standard
LC dual Fiber Bi-directional (SFP)
Optional/s
LC single Fiber Bi-directional (SFP)
Stm-16
interface
Rate
2.5 Gbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
Connector
Standard
LC dual Fiber Bi-directional (SFP)
Optional/s
LC single Fiber Bi-directional (SFP)
Stm-64
interface
Rate
10 Gbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
Connector
Standard
LC dual Fiber Bi-directional (SFP+)
Optional/s
LC single Fiber Bi-directional (SFP+)
FE ethernet interface
Rate
125 Mbit/s
Optical interface
According to the selected SFP/SFP+ module
Connector type
SFP
Interface standard
IEEE 802.3
Working mode
Auto negotiation, forced 100M full duplex
CE ethernet interface
Rate
1.25 Gbit/s
Optical interface
According to the selected SFP/SFP+ module
Connector type
SFP
Interface standard
IEEE 802.3
Working mode
Auto negotiation, forced 1000M full duplex
10G Ethernet interface
Rate
10Gbit/s
Interface standard
IEEE 802.3
Optical interface
According to the selected SFP/SFP+ module
Connector type
SFP+
Working mode
Full duplex
OUT1 interface
Transmission rate
2.5Gbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
connector
SFP
OUT2 interface
Transmission rate
10Gbit/s
Line pattern
Scramble NRZ
Optical interface
According to the selected SFP/SFP+ module
connector
SFP+
External clock Input/output interface
rate
2048 Kbit/s or 2048 KHz
Connector type
RJ45
voltage
voltage
AC~220v (AC 85v ~ 264v)
power
power
<28w
Environment
Operating temperature
0~50 centigrade
Storage temperature
-25 ~ 60 centigrade
Relative Humidity
10 ~ 90 % RH (non -condensing)
Physical Dimension H/D/W
Size-mm
44.180.360
Weight full load
< 2.1 Kg
Technical Data Sheet Technical Data SheetPopular03/08/1400 20:21:1457.41 KB
